Elektro-L3 HRIT Array

Elektro-L3 sends its high-resolution HRIT images at 1691 MHz every three hours, at xx:12 UTC. HRIT runs at 1.15 MS/s, far faster than the LRIT images we decode live on the Elektro-L3 ground station page, so each symbol carries much less energy. Our 85 cm dish gets an Es/N0 of about −1.5 dB on HRIT, and the decoder needs about +2 dB before the first frames come out.

Instead of a bigger dish, the HRIT array uses several small ones. Every station records the same transmission as raw I/Q and uploads it. A server aligns the recordings and adds them coherently: the satellite signal is the same at every station, the noise is not. N equal stations give 10·log10(N) dB more than one, so two stations gain 3 dB and four stations 6 dB.

Several small ground stations record the Elektro-L3 HRIT downlink; an array server aligns, combines and decodes the recordings
Each station records the same HRIT transmission as raw I/Q. The array server aligns the recordings in time, frequency and phase, adds them coherently and decodes the result.

How it works

  • Record. Each station records six minutes at 1691.0 MHz, 2.4 MS/s, starting at xx:11:30 UTC, and uploads the file (1.7 GB) to the array server, where it is kept for 36 hours.
  • Align. The recordings differ in start time, sample clock, carrier frequency and phase. The combiner measures all four along the transmission and corrects them, also mirrored spectra and lost USB buffers.
  • Combine. The aligned recordings are added with maximum-ratio weights: the stronger a station, the more it counts.
  • Decode. SatDump decodes the combination like a single recording.
Block diagram of the DC8PAT station: dish, LNA, RTL-SDR, Raspberry Pi with nmux, LRIT decoder and HRIT recorder with upload
Reference setup at DC8PAT (JN58ua). One 2.4 MS/s stream at 1691.0 MHz feeds the live LRIT decoder and the HRIT recorder.

At DC8PAT the HRIT recorder shares the receiver with the live LRIT decoder: one stream from the RTL-SDR feeds both, nothing is retuned. One HRIT recording looks like this:

In-band power over time and signal-to-noise density over frequency of one HRIT recording
One HRIT recording (15 November 2026, 12:12 UTC, DC8PAT). Top: in-band power over the six minutes, with the transmission in the middle. Bottom: signal-to-noise density across the signal, which is about 2 MHz wide.

Live dashboard

The dashboard updates every few minutes. Uploads shows which station delivered a full recording for which slot, how much data and how long after the transmission it arrived. Combiner shows the Es/N0 of each station and of the combination, how much each station contributed, how close the combination came to the ideal sum, and how many frames SatDump decoded. The dashed lines mark the decoder threshold: about +2 dB for the first frames, +3 dB for most of them. A slot is combined as soon as two stations have uploaded, and again when a further station arrives.

Status

Three stations take part so far: DC8PAT (JN58ua), OE3HWC and SQ9GOL. On synthetic test recordings with real Elektro frames the combiner loses less than 0.1 dB, and four stations at −3 dB each decode together although none decodes alone. On 17 November 2026, 21:12 UTC, the array decoded real HRIT frames for the first time:

StationEs/N0Decoded frames
OE3HWC−0.1 dBnone
SQ9GOL−2.2 dBnone
Combined+1.7 dB9948 frames

Every frame has a valid header and frame counters in sequence. The combination loses 0.3 dB against the ideal sum. It still misses about half of the transmitted frames, so the image files are not complete yet; that needs about +3 dB, one more station of this size.

DC8PAT is off the air at the moment while we repair its receive chain. OE3HWC alone reaches about 0 dB, two to three dB short of the decoder threshold; two or three healthy stations together should get there, and every further station adds margin.

Join the array

Anyone with an L-band dish that receives Elektro-L3 can take part. The recorder, upload tools, combiner and documentation are on GitLab. Each station gets its own upload token; get in touch if you want one.